Multicast Filtering - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
The fields that can be configured in Group Profile Table are described below:
Parameter
Profile Name
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.
Click the Delete All button to delete all the entries found in the display table.
The fields that can be configured in Access Group Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.

Multicast Filtering

This window is used to view and configure the Layer 2 multicast filtering settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast Filtering, as shown
below:
The fields that can be configured are described below:
Parameter
VID List
Multicast Filter Mode
Description
Enter the group profile name for the multicast VLAN feature here. This
name can be up to 32 characters long.
Description
Figure 5-71 Multicast Filtering Window
Description
Enter the VLAN ID list that will be used for this configuration here.
Select the multicast filter mode here. Options to choose from are
Forward Unregistered, Forward All, and Filter Unregistered.
•
When selecting the Forward Unregistered option, registered
multicast packets will be forwarded based on the forwarding
table and all unregistered multicast packets will be flooded based
on the VLAN domain.
•
When selecting the Forward All option, all multicast packets will
be flooded based on the VLAN domain.
•
When selecting the Filter Unregistered option, registered
packets will be forwarded based on the forwarding table and all
unregistered multicast packets will be filtered.
157