D-Link DXS-3600 Series Reference Manual page 272

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Interval
Priority
Click the Apply button to accept the changes made.
PIM for IPv6 RP Embedded Settings
This window view and configure the IPv6 PIM embedded settings. Embedded RP defines an address
allocation policy in which the address of the RP is encoded in an IPv6 multicast group address. This
allows an easy deployment of scalable inter-domain multicast and simplifies the intra-domain multicast
configuration as well. IPv6 Multicast group addresses embedded with RP information start with ff70::/12
where the flag value of 7 means embedded RP.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6
> PIM for IPv6 RP Embedded Settings, as shown below:
The fields that can be configured in PIM for IPv6 RP Embedded Settings are described below:
Parameter
RP Embedded
Click the Apply button to accept the changes made.
PIM for IPv6 RP Table
This window is used to find and display IPv6 PIM RP information.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6
> PIM for IPv6 RP Table, as shown below:
The fields that can be configured in RP Mapping Table are described below:
Parameter
Group Address/Prefix Length
Description
Enter the RP candidate's advertisement interval value here. The range
is from 1 to 16383 seconds.
Enter the RP's priority value here. The range is from 0 to 255.
Figure 6-125 PIM for IPv6 RP Embedded Settings Window
Description
Select to enable or disable the RP embedded feature here.
Figure 6-126 PIM for IPv6 RP Table Window
Description
Enter the multicast group's IPv6 address and prefix length here.
261