D-Link DXS-3600 Series Reference Manual page 596

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

No-Split-Horizon

Click the Apply button to accept the changes made.

After clicking the Show Detail button, the following page will appear.

Click the Back button to return to the previous window.

After clicking the

Figure 12-8 VPLS Settings (Show Detail, Peers, Show Detail) Window

Click the Back button to return to the previous window.

After clicking the

Select the type here. Options to choose from are Backup and

Standalone. Selecting the Backup option will create a backup peer for

PW redundancy of an H-VPLS.

Selecting this option specifies that a peer is used as the spoke PW.

The packets from other PWs in the VPLS can be forwarded to this PW

and the packets from this PW can be forwarded to other PWs in the

VPLS. If this option is not specified, the peer is used as a network PW.

The packets from other network PWs in a VPLS must not be forwarded

to this PW and the packets from this PW must not be forwarded to

other network PWs in the VPLS.

Figure 12-7 VPLS Settings (Show Detail) Window

link next to Peers Via Pseudowires, the following page will appear.

link next to Local ACs, the following page will appear.