D-Link DXS-3600 Series Reference Manual page 389
Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (1328 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
Advertisement
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Assign rule criteria are described below:
Parameter
Source
Destination
Specify ICMP Message Type
ICMP Message Type
Message Code
DSCP
Flow Label
Time Range
Action
Click the Back button to return to the previous window.
Click the Next button to continue.
Protocol Type - Protocol ID
After selecting the Protocol ID option as the Protocol Type, the following section will appear.
Description
Select and enter the source information here. Options to choose from
are Any, Host, and IPv6. When the Any option is selected, any source
traffic will be evaluated according to the conditions of this rule. When
the Host option is selected, enter the source host's IPv6 address here.
When the IPv6 option is selected, the Prefix Length option will also be
available. Enter the source IPv6 address and prefix length value in the
spaces provided.
Select and enter the destination information here. Options to choose
from are Any, Host, and IPv6. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host's
IPv6 address here. When the IPv6 option is selected, the Prefix
Length option will also be available. Enter the destination IPv6
address and prefix length value in the spaces provided.
Select the ICMP message type used here.
When the ICMP Message Type is not selected, enter the ICMP
Message Type numerical value used here. When the ICMP Message
Type is selected, this numerical value will automatically be entered.
When the ICMP Message Type is not selected, enter the Message
Code numerical value used here. When the ICMP Message Type is
selected, this numerical value will automatically be entered.
Select or enter the DSCP value used here. This value must be
between 0 and 63.
Enter the flow label value here. This value must be between 0 and
1048575.
Enter the name of the time range to associate with this ACL rule.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
378
Advertisement
Table of Contents
