Removing The Clutch (Cl1/Cl2/Cl3); Replacement Procedure - Canon imageRUNNER 2545 Series Service Manual

4
Parts Replacement and Cleaning > PCB > Removing the Clutch (CL1/CL2/CL3) > Replacement Procedure

Removing the Clutch (CL1/CL2/CL3)

■ Replacement Procedure

1) Remove the rear cover (right).("Removing the Rear Cover (Right)"(page
2) Remove the rear cover (left).("Removing the Rear Cover (Left)"(page
3) Remove the right cover (upper rear).("Removing the Rear Right Cover (Upper)"(page
4-22).)
4) Remove the HVT PCB assembly.
- 1 connector
- 1 claw
- 3 screws
x1
x3
4 Parts Replacement and Cleaning > PCB > Removing the Clutch (CL1/CL2/CL3) > Replacement Procedure
5) Remove the clutch.
- 1 connector
- 1 resin E-ring
4-21).)
4-22).)
F-4-143
x1
CL2
CL3
4-62
CL1
F-4-144
4-62