Supported Functions: Hla Module - Siemens Sinamics S120 Function Manual

Hide thumbs Also See for Sinamics S120:
Table of Contents

Advertisement

2.3

Supported functions: HLA module

SINAMICS HLA and Safety Integrated
SINAMICS HLA supports the following Safety Integrated functions:
● Basic Functions
These functions are part of the standard scope of the drive and can be used without
requiring an additional license. These functions are always available. These functions do
not require an encoder and/or do not place any special requirements on the encoder
used.
– Safe Torque Off (STO)
– Safe Stop 1 (SS1, time-controlled)
● Extended Functions
Not e
Only S afety Integrated with encoder is possible
SINAMICS HLA only supports Safety Integrated Extended Functions with encoder.
These functions require an additional safety license. Extended Functions with encoder
require an encoder with safety capability.
Not e
E nc oder types f or SINAMICS HLA
The following encoder types are permissible for SINAMICS HLA:
• Single-encoder systems
• 2-encoder systems
– Safe Torque Off (STO)
Safety Integrated
Function Manual, (FHS), 07/2016, 6SL3097-4AR00-0BP6
Safe Torque Off is a safety function to avoid unexpected startup in accordance with
EN 60204-1. STO prevents the supply of power to the valve, which can produce a
force. It is equivalent to stop category 0.
Safe Stop 1 is based on the "Safe Torque Off" function. This means that a Category 1
stop in accordance with EN 60204-1 can be implemented.
– DRIVE-CLiQ encoder with safety capability
– sin/cos encoder connected via SME20/25, SME120/125 or SMC20 (1Vss, pure
analog signal processing)
– Encoders with DRIVE-CLiQ connection
– sin/cos encoder connected via SME20/25, SME120/125 or SMC20 (1Vss, pure
analog signal processing)
– HTL/TTL encoder connected via SMC30 (not in connection with SINUMERIK)
– TTL encoder connected via the onboard interface of the HLA module (not in
connection with SINUMERIK)
Safe Torque Off is a safety function that prevents the drive from restarting
unexpectedly according to EN- 60204-1.
General information about SINAMICS Safety Integrated
2.3 Supported functions: HLA module
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents