Function Diagrams And Parameters - Siemens Sinamics S120 Function Manual

Hide thumbs Also See for Sinamics S120:

Table of Contents

Commissioning

6.9 Commissioning TM54F by means of STARTER/SCOUT

● Change/activate settings (only available online)

– Change settings

– Activate settings

● Change password

In order to change the password, enter the old password (factory setting: 0) and then

enter and confirm the new password.

Function diagrams and parameters

Function diagrams (see SINAMICS S120/S150 List M anual)

You can select this button and enter the TM54F password to activate the

commissioning mode. The button function changes to "Activate settings".

This function activates your parameter settings and initiates calculation of the actual

CRC and the corresponding transfer to the target CRC.

A message is output prompting you to save the project and then restart the system. It

is also required to carry out an acceptance test.

SI TM54F - Parameter manager

Function Manual, (FHS), 07/2016, 6SL3097-4AR00-0BP6

Safety Integrated

Show Quick Links

Table of Contents