YASKAWA SGM-A3 User Manual page 8

Basic Terms
Unless otherwise specified, the following definitions are used:
Servomotor:
Servopack:
Servodrive:
Servo system: A complete servo control system consisting of servodrive, host controller,
Visual Aids
The following aids are used to indicate certain types of information for easier reference.
.
TERMS
Speed/Torque
Positions
JUSP-OP02A-1
NOTE A Σ-Series Servodrive alone cannot ensure the functionality and performance of the entire
machine control system. It must be combined with an appropriate machine and host control-
ler so that the entire control system works properly. Therefore, carefully read the instruction
manuals for the machine to be used before attempting to operate the servodrive.
Σ-Series SGM/SGMP Servomotor
An amplifier (Trademark of Yaskawa servo amplifier "DR2 Servopack")
A SGM/SGMP Servomotor and an amplifier (DR2 Servopack)
and peripheral devices
Indicates references for additional information.
Technical terms placed in bold in the text are briefly explained in a "TERMS" sec-
tion at the bottom of the page. The following kinds of technical terms are explained:
Technical terms that need to be explained to users who are not very familiar with
servo systems or electronic devices and technical terms specific to Σ Series Ser-
vos that need to be explained in descriptions of functions.
The text indicated by this icon is applicable only to Servopack in speed/torque con-
trol mode.
The text indicated by this icon is applicable only to Servopack in position control
mode.
The text indicated by this icon explains the operating procedure using hand-held
type digital operator (Type: JUSP-OP02A-1).
ix