Interface Port-Channel Commands - ZyXEL Communications GS-4024 User Manual

Table 90 Command Summary: Configuration Mode (continued)
COMMAND
storm-control
time <Hour:Min:Sec>
date <month/day/
year>
help
timezone <-
1200|...|1200>
timesync <daytime|time|ntp>
server <ip>
trunk <T1|T2|T3|T4|T5|T6>
<T1|T2|T3|T4|T5|T6>l
acp
<T1|T2|T3|T4|T5|T6>i
nterface <port-list>
interface <port-
list> timeout <lacp-
timeout>
vlan <1-4094>
vlan-stacking
<SPTPID>
vlan-type <802.1q|port-based>
vlan1q gvrp
port-isolation

39.9.4 interface port-channel Commands

The following table lists the
Use these commands to configure the ports.
Chapter 39 Introducing the Commands
interface port-channel
GS-4024 User's Guide
DESCRIPTION
Enables broadcast storm
control on the switch.
Sets the time in hour, minute
and second format.
Sets the date in year, month
and day format.
Displays help information.
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
Sets the time server protocol.
Sets the IP address of your time
server.
Activates a trunk group.
Enables LACP for a trunk
group.
Adds a port(s) to the specified
trunk group.
Defines the port number and
LACP timeout period.
Enters the VLAN configuration
mode. See Section 39.9.6 on
page 247 for more information.
Enables VLAN stacking on the
switch.
Sets the SP TPID (Service
Provider Tag Protocol
Identifier).
Specifies the VLAN type.
Enables GVRP.
Enables port-isolation.
commands in configuration mode.
243