Chapter 4 Procedures Before Operation; Initial Start-Up Procedure - Mitsubishi Electric MELSEC L Series User Manual

CHAPTER 4
This chapter describes the procedures before operating the head module.
4.1
The following is the start-up procedure for using the head module for the first time.
For start-up examples, refer to the
Check box
Downloaded from ManualsNet.com
PROCEDURES BEFORE OPERATION

Initial Start-up Procedure

System consideration
Consider the system configuration and link device assignments.
Installation
Install the power supply module, head module, I/O module(s), intelligent
function module(s), and an END cover.
Unit test
Perform unit tests on the head module and intelligent function
module(s).
Connection
Connect Ethernet cables to the head module.
Configuration
Set parameters for each module.
search engine
User's manual for the master/local module used.

CHAPTER 4 PROCEDURES BEFORE OPERATION

Page 34, CHAPTER 5,
Page 65, CHAPTER 8
Page 36, Section 6.1,
Page 37, Section 6.2,
Page 45, Section 6.3
Page 45, Section 6.4
Page 47, Section 6.5
Page 51, CHAPTER 7,
Page 65, CHAPTER 8
4
29