To Start The Emulation Control Interface From The Workspace Window For An Emulation Probe - HP 16600A Series User Manual

To start the Emulation Control Interface from
the Workspace window for an emulation probe
If you have a stand-alone emulation probe connected to the logic
analysis system via LAN, use the Emulation Probe icon instead of the
Emulator icon.
1 Open the Workspace window.
2 Drag the Emulation Probe icon onto the workspace.
3 Right-click on the Emulation Probe icon, then select
.
Session...
4 In the Session window, enter the IP address or LAN name of the
emulation probe, then click
Solutions for CPU32
Chapter 6: Connecting and Configuring the Emulation Module
Using the Emulation Control Interface
Start Session
Start
.
129