Installing the HP 84125C Download Utility on Your Personal
Computer
Note
Downloading the DLP into the Analyzer
File Menu
Print Factors
7-10 Using the HP 84125C Utility
In the event that the spectrum analyzer memory is inadvertently
cleared and the DLP lost, it can be reloaded from the HP 84125C
download utility disk via your personal computer. You can also use
the download utility to edit or print antenna correction factors. Refer
to \Antenna Factors" for more information.
Use the following procedure to install the HP 84125C download utility
on your personal computer.
Hewlett-Packard recommends that you make a backup copy of the
HP 84125 download utility disk before attempting to install the utility
on the computer.
1. Insert the HP 84125C system download utility disk into the disk
drive of the personal computer.
2. Open MS-Windows File Manager and select the
oppy disk drive
(for example, drive A) then double-click on
complete your setup, follow the instructions on the computer
screen.
To use the HP 84125C Download Utility to reload the DLP, follow the
procedure below.
Connect a GPIB interface cable from the GPIB connector on the
rear panel of the personal computer to the HP-IB connector on the
rear panel on the spectrum analyzer.
Double-click on the HP 84125C Download utility icon to run the
download utility, then click on
system correction factors, will be restored in the spectrum analyzer.
The File menu provides the functions to print amplitude correction
data for the hardware congurations and to exit the HP 84125C
Utility.
The Print Factors File menu item allows you to print the amplitude
correction data for all of the hardware congurations (that is, 1 to 18
GHz, 1.5 to 18 GHz, 3.5 to 18 GHz, 8.25 to 18 GHz, 18 to 26.5 GHz,
and 26.5 to 40 GHz).
Exit
Exit closes the HP 84125C Utility.
install.exe
NNNNNNNNNNNNNNNNNNNNNNNNNN
. The DLP, including the
. To