To Power-On The Emulator And Your Target System; To Probe Target System Sockets - HP MC68040 User Manual

To power-on the emulator and your target system

CAUTION You must turn on power to the emulator before you turn on power to your target
system. Otherwise, the emulator may be damaged. Turn off power to the target
system before turning off power to the emulator.
1 Turn on power to the emulator.
2 Turn on power to your target system.
3 Before you turn off power to the emulator, be sure to turn off power to your target
system.

To probe target system sockets

• A flexible adapter is available from Hewlett-Packard for special target system
probing needs. It is listed in the following table:
Probe type
68040 PGA to PGA flexible adapter
Chapter 4: Using the Emulator
Using the Emulator In-Circuit
HP part number
E3429A
179