To Enable Or Disable Target System Interrupts; To Enable Or Disable Break On Writes To Rom - HP 68302 User Manual

To enable or disable target system interrupts

1
Choose the Settings→Emulator Config→Hardware... (ALT, S, E, H)
command.
Select or deselect the Enable target INT signal check box.
2
Choose the OK button to exit the Emulator Config dialog box.
3
When the check box is selected, the emulator detects interrupts from the
target system while running in the user program or foreground monitor.
Target system interrupts are ignored when the emulator is running in the
background monitor.
When the check box is deselected, the emulator ignores any interrupt from
the target system.

To enable or disable break on writes to ROM

1 Choose the Settings→Emulator Config→Hardware... (ALT, S, E, H)
command.
Select or deselect the Enable Break on write to ROM check box.
2
Choose the OK button to exit the Emulator Config dialog box.
3
When the check box is selected, a running program breaks into the monitor
when it writes to a location mapped as ROM.
When the check box is deselected, program writes to locations mapped as
ROM do not cause breaks into the monitor.
Chapter 3: Configuring the Emulator
Setting the Hardware Options
73