Connecting The Logic Analyzer To The Target System; Probes And Probe Pods; Connecting Pod Cables To The Logic Analyzer - HP 1650A Setting Up

3
:0
Probes .and-
Probel>ods
Connecting Pod
Cables to the
Logic Analyzer
Connecting the Logic Analyzer
to the Target System
Probes and probe pods allow you to connect the logic analyzer to
your target system. Each probe pod carrys 16 data channels, one
clock channel. one pod ground and two power lines for preprocessors.
iou connect the pod cables to the pod connectors on the real' panel of
the logic analyzer. The connectors are keyed for proper or-ientation.
You can connect either end of the cable to the rear panel since both
ends of the cables are alike"
Connecting Logic Analyzer to the Target System
3-1