Display Rip - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

[Sysname] rip 100
[Sysname-rip-100] default-route only cost 2
Related commands
rip default-route

display rip

Use display rip to display state and configuration information for a RIP process.
Syntax
display rip [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535. If no process is specified, the
command displays state and configuration information for all RIP processes.
Examples
# Display current state and configuration information for all RIP processes.
<Sysname> display rip
Public VPN-instance name:
RIP process: 1
RIP version: 1
Preference: 100
Fast-reroute:
Checkzero: Enabled
Default cost: 0
Summary: Enabled
Host routes: Enabled
Maximum number of load balanced routes: 8
Update time
Suppress time :
Update output delay:
Silent interfaces: None
Default routes: Originate
Verify-source: Enabled
Networks:
Configured peers: None
Triggered updates sent: 0
Routing policy: abc
Routing policy: frr
:
30 secs
120 secs
1.0.0.0
Timeout time
Garbage-collect time :
20(ms)
Output count:
Default routes cost: 3
32
:
180 secs
120 secs
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents