Preference; Reset Ripng Process - HP 5920 Series Command Reference Manual

Related commands
max-ecmp-num

preference

Use preference to specify the preference for RIPng routes.
Use undo preference to restore the default.
Syntax
preference [ route-policy route-policy-name ] value
undo preference
Default
The preference of RIPng routes is 100.
Views
RIPng view
Predefined user roles
network-admin
Parameters
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
value: Specifies the preference for RIPng routes, in the range of 1 to 255.
Usage guidelines
You can specify a routing policy to set a preference for the matching RIPng routes.
The preference set by the routing policy applies to all matching RIPng routes. The preference of
•
other routes is set by the preference command.
If no preference is set by the routing policy, the preference of all RIPng routes is set by the preference
•
command.
Examples
# Set the preference for RIPng routes to 120.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] preference 120

reset ripng process

Use reset ripng process to reset a RIPng process.
Syntax
reset ripng process-id process
Views
User view
430