Juniper ACX1000 Configuration Manual page 184

ACX Series Universal Access Router Configuration Guide
Failure Situation—RPL Owner Node
126
Originator Remote Node ID
No 00:01:01:00:00:01
user@node2> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg102
Interface Control Channel
ge-1/2/1 ge-1/2/1.1
ge-1/0/2 ge-1/0/2.1
Signal Failure Admin State
Clear IFF ready
Clear IFF ready
user@node2> show protection-group ethernet-ring node-state
Ethernet ring APS State
pg102 idle
Restore Timer Quard Timer
disabled disabled
user@node2> show protection-group ethernet-ring statistics group-name pg102
Ethernet Ring statistics for PG pg101
RAPS sent
RAPS received
Local SF happened:
Remote SF happened:
NR event happened:
NR-RB event happened:
If the ring has a link failure between Node 2 and Node 3, the
the following outputs for Node 1:
user@node1> show protection-group ethernet-ring aps
Ethernet Ring Name Request/state
pg101 SF
Originator Remote Node ID
No 00:01:02:00:00:01
user@node1> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg101
Interface Control Channel
ge-1/0/1 ge-1/0/1.1
ge-1/2/4 ge-1/2/4.1
Signal Failure Admin State
Clear IFF ready
Clear IFF ready
user@node1> show protection-group ethernet-ring node-state
Ethernet ring APS State
pg101 protected
Restore Timer Quard Timer
disabled disabled
user@node1> show protection-group ethernet-ring statistics group-name pg101
Ethernet Ring statistics for PG pg101
RAPS sent
Forward State Ring Protection Link End
forwarding No
forwarding No
Event Ring Protection Link Owner
NR-RB No
Operation state
operational
: 0
: 1
: 0
: 0
: 0
: 1
No Flush Ring Protection Link Blocked
NO No
Forward State Ring Protection Link End
forwarding Yes
forwarding No
Event Ring Protection Link Owner
SF Yes
Operation state
operational
: 1
Copyright © 2017, Juniper Networks, Inc.
command will have
show