Juniper ACX1000 Configuration Manual page 358

ACX Series Universal Access Router Configuration Guide
Meaning
Purpose
Action
Meaning
Related
Documentation
300
SSU-B
SEC
The output for
run show ptp global-information
Ethernet mode and the parameters set for the master and the slave.
The output of run show ptp quality-level-mapping
clock class to the ESMC quality level.
Verifying Global Information Parameters After Configuring User-Defined Mapping
of the PTP Clock Class to the ESMC Quality Level in Hybrid Mode
Verify the global information parameters after configuring a user-defined mapping of
the PTP clock class to the ESMC quality level in hybrid mode by disabling the
convert-clock-class-to-quality-level
In operational mode, enter the
following output:
user@host> run show ptp global-information
PTP Global Configuration:
Domain number
Transport Encapsulation : IPv4
Clock mode
Priority Level1
Priority Level2
Unicast Negotiation
ESMC QL From Clock Class: Disabled
Clock Class/ESMC QL
Slave Parameters:
Sync Interval
Delay Request Interval: -6 (64 packets per second)
Announce Interval
Announce Timeout
Master Parameters:
Sync Interval
Delay Request Interval: -
Announce Interval
Clock Step
The output displays the parameters set in Synchronous Ethernet mode and the
parameters set for the master and the slave.
Guidelines for Configuring Hybrid Mode on ACX Series Routers on page 290
Hybrid Mode on ACX Series Routers Overview on page 288
Configuring Hybrid Mode and ESMC Quality Level Mapping on ACX Series Routers on
page 292
96
104
displays the parameters set in Synchronous
displays the default mapping of the
option.
run show ptp global-information
: 0
: Ordinary
: 128
: 128
: Disabled
: -
: -
: -
: 3
: -6 (64 packets per second)
: 1 (1 packet every 2 seconds)
: one-step
command to display the
Copyright © 2017, Juniper Networks, Inc.