Configuring Hybrid Mode With Mapping Of The Ptp Clock Class To The Esmc Quality Level; Configuring Hybrid Mode With A User-Defined Mapping Of The Ptp Clock Class To The Esmc Quality Level - Juniper ACX1000 Configuration Manual

Configuring Hybrid Mode with Mapping of the PTP Clock Class to the ESMC Quality Level

Configuring Hybrid Mode with a User-Defined Mapping of the PTP Clock Class to the ESMC
Quality Level
Copyright © 2017, Juniper Networks, Inc.
Configure PTP options at the
2.
Configure hybrid mode options at the
3.
To configure hybrid mode options with mapping of the PTP clock class to the ESMC
quality level, perform the following steps:
In configuration mode, go to the
1.
[edit]
user@host# edit protocols ptp slave
Configure the
convert-clock-class-to-quality-level
2.
between the ESMC SSM quality level and the PTP clock class.
[edit protocols ptp slave]
user@host# set convert-clock-class-to-quality-level
Configure the hybrid mode option on the slave.
3.
[edit protocols ptp slave]
user@host# edit hybrid
Configure the upstream unicast PTP master interface and IP address of the clock
4.
source.
[edit protocols ptp slave]
user@host# set interface interface-name clock-source ip-address
Configure one or more Synchronous Ethernet source interfaces for the slave as needed.
5.
[edit protocols ptp slave ]
user@host# set interface interface1-name unicast-mode clock-source ip-address
user@host# set interface interface2-name unicast-mode clock-source ip-address
NOTE: You must first configure these interfaces at the
synchronization]
information about configuring these interfaces, see
Series).
To configure hybrid mode options with a user-defined mapping of the PTP clock class
to the ESMC quality level, perform the following steps:
In configuration mode, go to the
1.
[edit]
Chapter 9: Configuring Timing and Synchronization
hierarchy level.
[edit protocols ptp]
[edit protocols ptp slave]
[edit protocols ptp slave]
option to set the default mapping
hierarchy level as Synchronous Ethernet sources. For
[edit protocols ptp slave]
hierarchy level.
hierarchy level:
[edit chassis
synchronization (ACX
hierarchy level:
293