Juniper ACX1000 Configuration Manual page 360

ACX Series Universal Access Router Configuration Guide
Table 34: SNMP trap notifications for timing defects and events (continued)
SNMP Trap
jnxTimingEventPtpServoStatus
jnxTimingEventPtpClockClassChange
jnxTimingEventPtpClockAccuracyChange
jnxTimingEventPtpGMChange
jnxTimingEventHybridStatus
302
Notification
Type
Events
Events
Events
Events
Events
To configure and generate timing defects and events trap notifications, include the
statement at the [
timing-events
hierarchy level as shown below:
[edit]
snmp {
trap-group <group-name> {
categories {
timing-events;
}
}
}
The following is a sample configuration for SNMP timing in ACX Series routers:
snmp {
trap-options {
source-address 10.216.66.139;
}
trap-group timingGroup {
version v2;
destination-port 8999;
categories {
timing-events;
}
Description
Denotes the following PTP Servo states:
INITIALIZING
ACQUIRING (Master is elected and servo starts acquiring
lock)
PHASE ALIGNED (Locked to Master)
FREERUN (no PTP source available)
HOLDOVER (Slave locked to PTP for more than 12 hours
and then loses all the PTP sources)
Denotes a change in PTP clock class
Denotes a change in PTP accuracy
Denotes a change in PTP grandmaster clock
Denotes the following hybrid states:
INITIALIZING
ACQUIRING (Master is elected and servo starts acquiring
lock)
FREQUENCY LOCKED (Frequency locked but acquiring
phase)
PHASE ALIGNED (Frequency and phase locked)
edit snmp trap-group trap-group-name categories
Copyright © 2017, Juniper Networks, Inc.
]