Configuring Cesopsn On Ds Interfaces - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

Configuring CESoPSN on DS Interfaces

Related
Documentation
222
After you partition the DS interface, configure CESoPSN options on it. See
CESoPSN Options" on page
To configure CESoPSN encapsulation on a DS interface, include the
statement at the
[edit interfaces ds-mpc-slot/mic-slot/port-number:channel]
level.
In configuration mode, go to the
1.
ds-mpc-slot/mic-slot/port-number:channel]
[edit]
user@host# edit interfaces ds-mpc-slot/mic-slot/ port-number:channel
For example:
[edit]
user@host# edit interfaces ds-1/0/0:1
Configure CESoPSN as the encapsulation type.
2.
[edit interfaces ds-mpc-slot/mic-slot/port-number:partition ]
user@host# set encapsulation cesopsn
For example:
[edit interfaces ds-1/0/0:1 ]
user@host# set encapsulation cesopsn
Configure the logical interface for the DS interface.
3.
[edit interfaces ds-mpc-slot/mic-slot/port-number:partition ]
uset@host# set unit interface-unit-number
For example:
[edit interfaces ds-1/0/0:1 ]
user@host# set unit 0
To verify this configuration, use the
hierarchy level.
[edit interfaces ds-1/0/0:1]
user@host# show
encapsulation cesopsn;
unit 0;
16-Port Channelized E1/T1 Circuit Emulation MIC Overview on page 106
216.
[edit interfaces
hierarchy level.
command at the
show
"Setting the
encapsulation
hierarchy
[edit interfaces ds-1/0/0:1]
Copyright © 2017, Juniper Networks, Inc.