Acx5096 Router Hardware And Cli Terminology Mapping - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Table 13: CLI Equivalents of Terms Used in Documentation for an ACX5048 Router (continued)
Hardware
Item (as
displayed in Description (as
the CLI) displayed in the CLI)
FPC (n) Abbreviated name of
the Flexible PIC
Concentrator (FPC)
PIC (n) Abbreviated name of
the Physical Interface
Card (PIC)
48x10G–6x40G
Xcvr (n) Abbreviated name of
the transceiver
Power Power supply
supply (n)
Fan Fan

ACX5096 Router Hardware and CLI Terminology Mapping

40
Value (as displayed
in the CLI)
Value of n is always 0.
Value of n is always 0.
PIC 0
n is a value equivalent
to the number of the
port in which the
transceiver is
installed.
n is a value in the
range of 0-1.
n is a value in the
range of 0-4.
Figure 12: ACX5048 Interface Port Mapping
1
1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (48)
Table 14 on page 41 describes the hardware terms used in an ACX5096 router
documentation and the corresponding terms used in the Junos OS command line interface
(CLI). Figure 13 on page 41
Item in Documentation
The router does not have
actual FPCs. In this case,
FPC refers to the router
itself.
The router does not have
actual PIC devices; see
entries for PIC 0 for the
equivalent item on the
router.
Built-in network ports on
the front panel of the
router
Optical transceivers
AC power supply
DC power supply
Fan
2
3— 40 Gigabit Ethernet ports (6)
shows the port locations of the interfaces.
Additional Information
Interface Naming Conventions
Used in the Junos OS
Operational Commands
Interface Naming Conventions
Used in the Junos OS
Operational Commands
ACX5000 Universal Access
Router Overview
Port and Interface Specifications
AC Power Supply for an
ACX5000 Router
DC Power Supply for an
ACX5000 Router
Cooling System and Airflow in
an ACX5000 Router
3
Copyright © 2017, Juniper Networks, Inc.