Acx1000 And Acx1100 Routers Hardware And Cli Terminology Mapping; Mapping - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping

ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping
Table 7: CLI Equivalents of Terms Used in Documentation for ACX1000 Router
Hardware
Item (as
displayed Description (as
in the CLI) displayed in the CLI)
Chassis ACX1000
FPC (n) Abbreviated name of
the Flexible PIC
Concentrator (FPC)
30
Figure 5: ACX500 Outdoor Router Interface Port Mapping
1— GPS LED
2— FPC 0, PIC 0: 0/0/0 0/0/2
–
ACX500 Universal Access Router Overview
ACX500 Router Models
ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping on page 30
ACX1100 Routers Hardware and CLI Terminology Mapping on page 31
Table 7 on page 30 describes the hardware terms used in ACX1000 router documentation
and the corresponding terms used in the Junos OS command line interface (CLI).
Figure 6 on page 31 shows the port locations of the interfaces.
Value (as
displayed in the
CLI)
–
Value of n is
always 0.
3—
FPC 0, PIC 1:
with PoE+ support)
(3x1GE SFP)
Item in Documentation
Router chassis
The router does not have
actual FPCs. In this case,
FPC refers to the router
itself.
Copyright © 2017, Juniper Networks, Inc.
0/1/0 0/1/2
– (3x1GE RJ-45
Additional Information
Chassis Physical Specifications
for ACX1000 and ACX1100
Routers
Interface Naming Conventions
Used in the Junos OS Operational
Commands