Memory Card Initialization - Omron SYSMAC mini SP10 Operation Manual

Memory Card Initialization

Example
4-2 Memory Card Initialization
Initialization Procedure
Key Sequence
0 000
0 000
CHANNEL
0 000
CHANNEL
0000010101010101
000010101010101
1 00010101010101
10 0010101010101
100 010101010101
1000 10101010101
100 010101010101
10 0010101010101
1000010101010101
Bit 15
The Programming Console provides a slot for a Memory card to allow the
backup of programs. Only one model of Memory Card, HMC-ES141, may be
used. Each Memory Card has 16 Kbytes of S-RAM. A battery is built-in to the
Memory Card to allow the data to be retained. One Memory Card can hold
up to 27 SP10 programs or 18 SP16 or SP20 programs.
A program can be saved to a full memory card and read out, but an error
message ("ERR CARD FULL") will be displayed when the corrected file is
saved again.
After inserting a new Memory Card into the Programming Console, the Card
must be initialized using the following key sequence.
The corresponding displays are shown following.
00
DR 01
cD01 MON
cD01 CHG?
cD01 CHG?
cD01 CHG?
cD01 CHG?
cD01 CHG?
cD01 CHG?
cD01 CHG?
cD01 MON
Section 4-2
Bit 00
123