Overview; Features Of The Hkpf-D270 - Sony HKPF-D270 Owner's Record

Overview

The HKPF-D270 HDCAM Decoder Board is designed
1)
to convert SDTI (HDCAM) signal to HD SDI
(conforms to the SMPTE-292M).
The HKPF-D270 can be installed in the PFV-HD50A/
HD300 Digital Video Interface Unit. When installed,
the HKPF-D270 draws its power from the interface
unit.
Since the HKPF-D270 shares the same dimensions and
voltage specifications as the other HKPF-series boards
for the PFV-HD50A/HD300, it can be used in any
combination with the other boards, thus providing high
flexibility in system configurations.
Note
For information regarding the setting of on-board switches,
consult your nearest Sony service center.
The HKPF-D270 comprises the following items:
Board (1)
Connector panel (1)
Operation Manual (1)
Maintenance Manual (1)
Slot number labels (1 set)
..........................................................................................................................................................................................................
1) SDTI : Serial Data Transport Interface
SDTI is defined as SMPTE-305M.
2) SDI : Serial Digital Interface

Features of the HKPF-D270

2)
signal
Conversion to HD SDI signal
The HKPF-D270 is capable of converting the SDTI
(HDCAM) signal to the HD SDI signal.
Automatic input-signal-format detection
The HKPF-D270 can detect and automatically
conform to the number of effective scanning lines
(1,035 lines or 1,080 lines) in a SDTI (HDCAM)
signal.
Note
The field frequency is fixed to 59.94Hz.
External synchronization
The HKPF-D270 can output the HD SDI signal with
synchronized to the external SYNC signal (1125 or
525 SYNC signal).
Error correction
The HKPF-D270 can detect and correct the bit errors
in transmission of the SDTI (HDCAM) signal.
3)
EDH function
The HKPF-D270 supports the EDH function.
3) EDH : Error Detection and Handling
3(GB)