Information Display (Clock) Removal And Installation - Suzuki 2006 SX4 Service Manual

9C-18 Instrumentation / Driver Info. / Horn:
10) Remove front pillar trims (1).
11) Disconnect instrument panel harness connectors,
heater control cables and antenna cable for
instrument panel removal.
12) Remove steering column assembly referring to
"Steering Column Removal and Installation in
Section 6B".
13) Remove instrument panel ground wire.
14) Remove instrument panel mounting bolts (1).
15) Remove instrument panel (2) with steering support
member (3) and instrument panel harness.
1
1
I7RW01930011-01
1
3
2
I5RW0A930016-01
Installation
Reverse removal procedure noting the following.
• When installing each part, be careful not to catch any
cable or wiring harness.
• Tighten instrument panel mounting bolts to specified
torque.
Tightening torque
Instrument panel mounting bolt (a): 23 N·m (2.3
kgf-m, 17.0 lb-ft)
(a)
• Install steering column assembly referring to "Steering
Column Removal and Installation in Section 6B".
• Enable air bag system referring to "Enabling Air Bag
System in Section 8B".
Information Display (Clock) Removal and
Installation
Removal
1) Remove audio unit referring to "Audio Unit Removal
and Installation (If Equipped)".
2) Remove center ventilation louver (1) from instrument
panel and then disconnect hazard switch connector.
(a)
I5RW0A930017-01
S6RW0D9306016
1
I5RW0A930018-01