Dimensioned Drawings, Drilling Dimensions For The Pm240-2 Power Module, Ip20 - Siemens SINAMICS G120 Operating Instructions Manual

Installing
4.3 Installing Power Modules
4.3.6

Dimensioned drawings, drilling dimensions for the PM240-2 Power Module, IP20

The following dimension drawings and drilling patterns are not to scale.
Frame sizes FSA ... FSC
Table 4-12
Frame
size
FSA
FSB
FSC
BOP-2, IOP-2 or blanking cover
1)
Power Module depth without Control Unit: 165 mm
2)
Table 4-13
Frame
size
FSA
FSB
FSC
The Power Module is designed for mounting without any lateral cooling air clearance. For tolerance
1)
reasons, we recommend a lateral clearance of approx. 1 mm.
74
Dimensions depend on the operator panel (OP) that is inserted
Width Height [mm]
[mm]
without shield
plate
73 196
100 292
140 355
Drilling dimensions, cooling clearances and fixing
Drilling dimensions [mm]
h b c
186 62.3 6
281 80 6
343 120 6
Mounting depth in the cabinet with
with shield plate without OP
276
370
432
Cooling air clearances [mm]
Top Bottom
80 100
80 100
80 100
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
Control Unit (CU) [mm]
2)
with OP
224 235
224 235
224 235
Fixing/torque [Nm]
1)
Front
100 3 x M4 / 2.5
100 4 x M4 / 2.5
100 4 x M5 / 3.5
1)