Power Module Accessories; Table 8-1 Din Rail Pitch; Table 8-2 Din Rail Mounting Kit Ordering Information - Siemens SINAMICS G120 Hardware Installation Manual

8.2

Power Module accessories

DIN rail mounting kit
The DIN rail mounting kit (DRMK) is designed to allow the SINAMICS G120 Frame Size A
and B (FSA and B) inverters to be mounted on a pair of parallel DIN rails.
The DRMK provides an integrated screening plate to allow for the termination of the
screened motor cables and other screened cable used with the inverter.
The DRMK for FSA allows for the mounting of either the inverter as a stand-alone or with the
inverter and the footprint filter. The FSB inverters, due to their physical size and weight can
only be mounted as stand-alone inverters.
The EM brake or safe brake module can only be mounted on the FSA or FSB DIN rail when
used in conjunction with the relevant screen termination kit, see table below.
The required DIN rail pitch for each frame size are given in the table below.
Table 8-1
Frame size
FSA
FSB
Ordering information is given in the following table:
Table 8-2
Description
G120/S120 FSA DIN Rail Kit
G120/S120 FSB DIN Rail Kit
NEMA 1 kit
The NEMA 1 kit has been designed to provide some protection against limited amounts of
falling dirt in an indoor environment. The level of protection does not protect against falling
liquids.
The NEMA 1 kit only provides protection for the inverter itself and does not protect any of the
footprint options or the DIN rail kit.
The kit provides protection for both the power module and the control unit including easy
access to the MMC on the control unit.
The NEMA 1 kit consists of the following components:
• Top cover (to protect the top of the inverter).
• Metal glanding box (to allow the correct termination of control cables).
• Gland box cover (to ensure that the control cables can not be touched accidentally).
Ordering information is given in the following table:
Power Modules PM240
Hardware Installation Manual, 2006-04-04, A5E00807525B AA
DIN rail pitch
DIN rail mounting kit ordering information
Spare parts/Accessories
8.2 Power Module accessories
DIN rail pitch (mm)
115 (± 1)
115 (± 1)
Order No.
6SL3262-1BA00-0BA0
6SL3262-1BB00-0BA0
8-3