Setting Of Refresh Left; Setting Of Vacuum Fan; Setting Of Feed Speed - MIMAKI TS500P-3200 Operation Manual

Chapter 3 Setup

Setting of Refresh Left

When you want to make a flushing operation at the left
side of the machine, set to "ON".
1
Press the
Local.
2
Press
press the
• Setup menu appears.
3
Press the
4
Press
and press the
5
Press
press the
• Set Value : ON/ OFF
6
Press the
end the setting.

Setting of Vacuum Fan

Sets the absorbability of the media.
By setting the absorption power to match the media, you
can prevent print errors due to media rise-up.
1
Press the
Local.
2
Press
press the
• Setup menu appears.
3
Press the
4
Press
and press the
5
Press
press the
• Set value : Host/Weak /Standard/ Strong/ OFF
6
Press the
end the setting.
3-10
key in
(MENU)
to select SETUP 1 to 4, and
key.
(>>) .
to select "Refresh Left"
key.
to select a set value, and
key.
key several times to
key in
(MENU)
to select SETUP 1 to 4, and
key.
(>>) twice .
to select "Vacuum Fan"
key.
to select a set value, and
key.
key several times to

Setting of Feed Speed

Changes the media feeding speed in printing.
1
Press the
Local.
2
Press to select SETUP 1 to 4, and
press the
• Setup menu appears.
3
Press the
4
Press to select "Feed Speed"
and press the
5
Press to select a set value, and
press the
• Set value : Host/ 10 to 200%
6
Press the
end the setting.
• If you change the settings of the print speed, the
color might change. After changing the feed
speed, please check there is no change in the
color in advance.
• After changing the settings, please perform the
media correction (
key in
(MENU)
key.
(>>) twice .
key.
key.
key several times to
P.3-6).