Panasonic KX-NS1000 Pc Programming Manual page 1192

28.1 Network Service—[1] IP Address/Ports
Installation Manual References
8.6.5 DNS Client
DSP IP Setting—Obtain DSP IP address automatically/Use the following DSP IP
address
Specifies whether the DHCP server assigns IP address information automatically to the DSP card(s), or to
enter the information manually.
Default
Obtain DSP IP address automatically
Value Range
Obtain DSP IP address automatically, Use the following DSP IP address
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Basic Settings
DSP IP Setting—DSP Card #1 - 1/DSP Card #1 - 2/DSP Card #2 - 1/DSP Card #2
- 2—IP Address
Specifies the IP address of the DSP card. This parameter is only available for entering values when Use the
following DSP IP address is selected.
Default
192.168.0.102
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Basic Settings
DSP IP Setting—DSP Card #1 - 1/DSP Card #1 - 2/DSP Card #2 - 1/DSP Card #2
- 2—MAC Address
Indicates the MAC address of the DSP card (reference only).
Default
Default MAC address
Value Range
00:00:00:00:00:00–FF:FF:FF:FF:FF:FF
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Basic Settings
1192 PC Programming Manual Document Version 2016-03