Network Service-[2-4] Server Feature-Http - Panasonic KX-NS1000 Pc Programming Manual

28.2.3 Network Service—[2-4] Server Feature—HTTP
HTTP server settings can be programmed.
HTTP (LAN / MNT)—Port number
Specifies the port number for HTTP connections using the LAN or MNT ports. This port is used for accessing
the PBX for Web Maintenance Console programming.
Default
80
Value Range
80, 1024–65535
Maintenance Console Location
28.2.3 Network Service—[2-4] Server Feature—HTTP
HTTPs (LAN / MNT)—HTTPs server
Enables or disables HTTPs for connections to the LAN or MNT ports using the PBX's HTTP server function.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
28.2.3 Network Service—[2-4] Server Feature—HTTP
HTTPs (LAN / MNT)—Port number
Specifies the port number for HTTPs connections. This port is used for accessing the PBX for Web
Maintenance Console programming when using a TLS connection.
Default
443
Value Range
443, 1024–65535
Maintenance Console Location
28.2.3 Network Service—[2-4] Server Feature—HTTP
HTTPs (WAN)—HTTPs server
Enables or disables HTTPs for connections to the WAN port using the PBX's HTTP server function.
If you enabled HTTPs, it will be disabled automatically after 24 hours for security purposes.
Document Version 2016-03
28.2.3 Network Service—[2-4] Server Feature—HTTP
PC Programming Manual 1205