Panasonic KX-NS1000 Pc Programming Manual page 116

7.1.1 Utility—Diagnosis—Card Diagnosis
The tests that are performed are as follows:
Line current OFF (Ext->CO)
Line current ON (Ext->CO)
Off hook detection (CO->Ext)
DTMF detection (CO->Ext)
DP detection (CO->Ext)
BELL detection (Ext->CO)
Speech path (Ext->CO)
Speech path (CO->Ext)
To perform a pair port test
1.
Click on the Status cell of the extension card to be tested, and set it to "OUS".
2.
Click Test.
A new window will be displayed.
3.
Select the Pair Port Test option. A new window will be displayed.
4.
In Extension Line, in the Site-Shelf-Slot No. drop-down list, select the extension card to test. Each card
will be preceded by a 3-digit number, following the pattern "XYZ":
•
X: Site number (1–16)
•
Y: Shelf number (2–3 [Corresponding to Legacy Gateway 1 or 2])
•
Z: Slot number (1–11)
5.
From the Port No. drop-down list in Extension Line, select the port number of the extension to test.
6.
In CO Line, in the Site-Shelf-Slot No. drop-down list, select the CO line card to test. Each card will be
preceded by a 3-digit number, following the pattern "XYZ" as described in step 4.
7.
From the Port No. drop-down list in CO Line, select the port number of the CO line to test.
8.
Click Test.
The error report will be displayed.
9.
Select an option:
•
Click Capture if you want to save the displayed information.
1.
Specify the save destination and file name.
2.
Click Save.
•
Click Cancel to return to the Diagnosis screen.
116 PC Programming Manual
Line current from extension to CO line turns off.
Line current from extension to CO line turns on.
Off-hook generation/detection from CO line to
extension
DTMF generation/detection from CO line to extension
DP generation/detection from CO line to extension
BELL generation/detection from extension to CO line
Speech path from extension to CO line
Speech path from CO line to extension
Document Version 2016-03