Single Co Line Access - Panasonic KX-NCP500 Pc Programming Manual

Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
4.12 [2-7-1] Class of Service—COS Settings—Programming & Manager—
Feature Manual References
12.1.2 OGM (Outgoing Message)

Single CO Line Access

Specifies the feature number used to make a CO line call using a certain CO line.
Default
*37
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Manual References
3.1.16 CO Line Access
Parallel Telephone (Ring) Mode Set / Cancel
Specifies the feature number used to set or cancel an SLT connected in parallel with a DPT to ring when
receiving an incoming call.
Default
*39
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Document Version 2009-12
4.9 [2-6-1] Numbering Plan—Main
Manager
PC Programming Manual 359