Off Out Of Service/Not Configured; Green - Cisco ASR 902 Troubleshooting Manual

G.703/FXS/FXO Interface Module LEDs
LED Label
Tx LEDs
G.703/FXS/FXO Interface Module LEDs
The following table summarizes the LEDs for the G.703/FXS/FXO interface module.
Table 23: Cisco ASR 903 Router G.703/FXS/FXO IM LEDs
LED Label
Power (PWR)
Operating Status (STAT)
Port Bi-color LEDs
Power Supply LEDs
The tables below summarize the power supply LEDs for the AC and DC power supplies.
Table 24: AC Power Supply LEDs (A900-PWR-550-A) and (A900-PWR-1200-A)
LED
Input OK
Troubleshooting
16
Color/State

Green

Solid
Yellow
Off
Color or
State
Green
Red
Off
Red
Yellow
Green
Off
Green
Solid Yellow
Off
Color/State Description
Off No input voltage
Amber Input voltage out of range
Green Input voltage within acceptable operating range
Description
Link up with activity
Fault/Error/Alarm
Link Down
Description
All power rails are within spec.
Disabled
No Power
Failure
Booting
Operational
No Power
IM-FPGA Link/In-Frame, working properly
Fault or Loop condition
Out of Service or not configured (default state)
Troubleshooting