Datalogic MAGELLAN 9800i Product Reference Manual page 89

You have completed the scale calibration procedure. Before replacing the Cali-
bration Switch Cover and sealing the scale, you must now continue with the cal-
ibration verification tests to complete the scale's calibration. If you are
weighing in pounds, continue with the following procedures to verify that the
scale was successfully calibrated and that it weighs properly. If you are weigh-
ing in kilograms, turn to the instructions titled,
grams)"
Figure 42. Calibration Cover and Switch Location
A
B
NOTE
Figure 43. Moving the EAS Antenna
Product Reference Guide
on page 85.
A
Calibration Seal Location
Calibration Access Cover
If an EAS antenna is present, it must be lifted in order to access
the calibration switch.
EAS Antenna
Calibration
Switch Cover
Calibrating the Scale (Pounds & Kilograms)
"Calibration Verification (Kilo-
C
B
Calibration Switch Opening. Use a
long, blunt object to reach in and
C
press the Calibration Switch.
79