Enter/Exit Programming Mode
UPC/EAN Correlation
Enables/disables character correlation for UPC/EAN.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
050701(CR)
UPC/EAN Correlation = Enable
264
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
Other UPC/EAN Options
050700(CR)
UPC/EAN Correlation = Disable
Magellan™ 9800i Scanner