I 2 Of 5 Check Character Calculation - Datalogic MAGELLAN 9800i Product Reference Manual

I 2 of 5 Check Character Calculation

Enables/disables calculation and verification of an optional Interleaved 2 of 5
check character.
1. To set this feature:
2. Scan the ENTER/EXIT Programming Mode bar code.
3. Scan either the enable or disable barcode below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
007001(CR)
I 2 of 5 Check Character Calculation = Enable
Product Reference Guide
If check character calculation is disabled, the risk is
increased that a misread can occur. When disabled, any
check characters in a barcode are treated as data charac-
ters.
NOTE
Enter/Exit Programming Mode
007000(CR)
I 2 of 5 Check Character Calculation = Disable
319