Code 39 Length 2 - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Code 39 Length 2

If Code 39 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 39 second fixed length. If Code 39 Length Control is set to Variable-
Length decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
302
When in Fixed Length mode, if Length 2 is set to the value
of 00, then only Length 1 will apply
NOTE
Set Code 39 Length 2 on page 302
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
that represent the desired label length. The selectable range for this
option is 00, no second fixed length, or 01 to 50. Pad all single digit num-
bers with a leading zero to yield a two-digit entry (00-50).
gramming Mode bar code.
below. You'll need to
Keypad on page 403
04B3(CR)
Set Code 39 Length 2
Default setting for this feature = 50
Magellan™ 9800i Scanner
Code 39 Enable
in Appendix C