Databar Omnidirectional Minimum Read - Datalogic MAGELLAN 9800i Product Reference Manual

DataBar Omnidirectional Minimum Read

This feature specifies the minimum number of consecutive DataBar Omnidirec-
tional decodes before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
04D202(CR)
DataBar Omnidirectional Minimum Read = 2
04D204(CR)
DataBar Omnidirectional Minimum Read = 4
Product Reference Guide
Enter/Exit Programming Mode
04D201(CR)
DataBar Omnidirectional Minimum Read = 1
04D203(CR)
DataBar Omnidirectional Minimum Read = 3
285