Aztec Enable - Datalogic MAGELLAN 9800i Product Reference Manual

Aztec Enable

Enables/disables the ability of the scanner to decode Aztec labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
043001(CR)
Aztec = Enable
Product Reference Guide
Enter/Exit Programming Mode
043000(CR)
Aztec = Disable
385