Codabar Start Stop Character Set - Datalogic MAGELLAN 9800i Product Reference Manual

Codabar Start Stop Character Set

This feature specifies the format of transmitted Codabar start/stop characters.
Options are:
• ABCD/TN* E
• ABCD/ABCD
• abcd/tn* e
• abcd/abcd
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode below or from the following page representing the
desired option. You'll need to cover any unused barcodes and facing
pages to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
022E01(CR)
Codabar Start Stop Character Set = ABCD/ABCD
022E03(CR)
Codabar Start Stop Character Set = abcd/abcd
Product Reference Guide
Enter/Exit Programming Mode
022E00(CR)
Codabar Start Stop Character Set = ABCD/TN* E
022E02(CR)
Codabar Start Stop Character Set = abcd/tn* e
DEFAULT
329