Code 32 Start Stop Character Transmission - Datalogic MAGELLAN 9800i Product Reference Manual

Hide thumbs Also See for MAGELLAN 9800i:

Table of Contents

Enter/Exit Programming Mode

Code 32 Start Stop Character Transmission

Enables/ disables transmission of start and stop characters for Code 32.

To set this feature:

1. Scan the ENTER/EXIT Programming Mode bar code.

2. Scan either the enable or disable barcode below. You'll need to cover any

3. Complete the programming sequence by scanning the ENTER/EXIT Pro-

Code 32 Start Stop Character Transmission = Enable

This item is ignored when the advanced feature, Full Label

Edit, is enabled.

unused barcodes on this and the facing page to ensure that the scanner

reads only the barcode you intend to scan.

gramming Mode bar code.

Code 32 Italian Pharmacode Enable

Code 32 Start Stop Character Transmission = Disable

Magellan™ 9800i Scanner

Show Quick Links

Table of Contents