UPC/EAN Stitch Unlike Label Halves
This setting enables the stitching of two UPC-A/EAN-13 label halves together
that may have different characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
054201(CR)
UPC/EAN Stitch Unlike Label Halves = Enable
Product Reference Guide
Enter/Exit Programming Mode
054200(CR)
UPC/EAN Stitch Unlike Label Halves = Disable
267