I 2 Of 5 Length 2 - Datalogic MAGELLAN 9800i Product Reference Manual

I 2 of 5 Length 2

If I 2 of 5 Length Control is set to Fixed-Length decoding, this feature specifies
I 2 of 5 second fixed length. If I 2 of 5 Length Control is set to Variable-Length
decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 00, or 02 to 50; even numbers only. Pad all single digit numbers
with a leading zero to yield a two-digit entry (02-50).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Product Reference Guide
When in Fixed Length mode, if Length 2 is set to the value
of 00 (zero), then only Length 1 will apply.
NOTE
Set I 2 of 5 Length 2 on page 325
Enter/Exit Programming Mode
below. You'll need to
Keypad on page 403
0057(CR)
Set I 2 of 5 Length 2
Default setting for this feature = 50
in Appendix C
325