Code 93 Length 2 - Datalogic MAGELLAN 9800i Product Reference Manual

Code 93 Length 2

If Code 93 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 93 second fixed length. If Code 93 Length Control is set to Variable-
Length decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
cover any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
that represent the desired label length. The selectable range for this
option is 00 (meaning ignore this length), or 01 to 50. Pad all single digit
numbers with a leading zero to yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Product Reference Guide
When in Fixed Length mode, if Fixed Length 2 is set to the
value of 00 (zero), then only Length 1 will apply.
NOTE
Set Code 93 Length 2 on page 345
Enter/Exit Programming Mode
below. You'll need to
Keypad on page 403
0686(CR)
Set Code 93 Length 2
Default setting for this feature = 50
in Appendix C
345