Enter/Exit Programming Mode
Standard 2 of 5 Length Control
This feature specifies whether variable-length or fixed-length decoding will be
set for Standard 2 of 5.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
049701(CR)
Standard 2 of 5 Length Control = Fixed Length
362
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
Standard 2 of 5 Enable
049700(CR)
Standard 2 of 5 Length Control = Variable Length
Magellan™ 9800i Scanner