Code 128 Transmit Function Characters - Datalogic MAGELLAN 9800i Product Reference Manual

Code 128 Transmit Function Characters

Enables/disables transmission of Code 128 function characters 1, 2, 3, and 4.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
02C701(CR)
Code 128 Transmit Function Characters = Enable
Product Reference Guide
Disabled is the recommended setting for all interfaces.
NOTE
Enter/Exit Programming Mode
02C700(CR)
Code 128 Transmit Function Characters = Disable
309