Enable Ean Two Label - Datalogic MAGELLAN 9800i Product Reference Manual

Enter/Exit Programming Mode

Enable EAN Two Label

Enables/disables the ability of the scanner to decode EAN two-label pairs.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
004401(CR)
EAN Two Label = Enable
272
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode bar code.
Contact Customer Support for details about advanced pro-
gramming for this feature.
NOTE
Other UPC/EAN Options
004400(CR)
EAN Two Label = Disable
Magellan™ 9800i Scanner