Enter/Exit Programming Mode
Micro PDF 417 Length Control
Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
Configuring Variable Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
035B01(CR)
Micro PDF 417 Length Control = Fixed Length
376
When fixed length decoding is enabled, the scanner
Length 2 Programming Instructions on page 377
fixed length) using the
Instructions on page
Length 2 Programming Instructions on page 377
Length 2 Programming Instructions on page
When variable length decoding is enabled, the scan-
Micro PDF 417 Length 1, Length 2 Programming
377.
035B00(CR)
Micro PDF 417 Length Control = Variable Length
Micro PDF 417 Enable
Micro PDF 417 Length 1,
that follow this page.
Micro PDF 417 Length 1,
that follow this page.
Micro PDF 417 Length 1,
377.
Magellan™ 9800i Scanner